The Ford Barn - View Single Post

36tbird · 11-03-2011, 04:14 PM

You know that a 4"dropped axle will not lower your car 4", right? But, besides that, I think that the Speedway catalog gives the perch bolt to perch bolt measurements you need to match what your stock set up. Rather than heat up your stock spindles, you might want to get new spindles with the bolt on arms that will clear. Check with Chassis Engineering for those and I reckon they can answer your axle question, too.

11-03-2011, 04:14 PM	#4
36tbird Senior Member Join Date: May 2010 Location: nw SanAntonio, TX Posts: 939	Re: Dropped axle question You know that a 4"dropped axle will not lower your car 4", right? But, besides that, I think that the Speedway catalog gives the perch bolt to perch bolt measurements you need to match what your stock set up. Rather than heat up your stock spindles, you might want to get new spindles with the bolt on arms that will clear. Check with Chassis Engineering for those and I reckon they can answer your axle question, too.