Re: Signal-stat 900 turn signal on positive ground
Quote:
Originally Posted by 51woodie
I have a 5007R in my '46 Coupe when I bought it, and the indicator didn't work. A bit of troubleshooting, and reading posts on this site and the EFV8 site, led me to the problem. A previous owner had installed a Hella 6V flasher, which I changed out for a 535 6V flasher, and the indicator now works. Don't ask me what the difference is in the two flashers. One other thing I did, because I can't hear the little click of the flasher at my age, was to install a small 6V buzzer up under the dash. I went to ground with one lead, and the blue (on my unit) wire for the power. It works great, but I had to put tape over 2/3 of the buzzer opening, as it was a bit too loud.
|
10/4 on the buzzer/beeper being too loud. Does anyone know of a similar "clicker" type gizmo?
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes.
It is better to be seen, than viewed.
"We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".
|