The Ford Barn - View Single Post

Will N · 07-18-2020, 09:41 AM

In addition to the things WHN mentioned, bake sure the wheel bearings are properly pre-loaded. Make sure the tie rod ends and drag link are snugged up. Make sure the toe-in is set correctly.

07-18-2020, 09:41 AM	#5
Will N Senior Member Join Date: Jul 2010 Location: Pennsylvania Posts: 1,101	Re: first ride In addition to the things WHN mentioned, bake sure the wheel bearings are properly pre-loaded. Make sure the tie rod ends and drag link are snugged up. Make sure the toe-in is set correctly.