The Ford Barn - View Single Post

MARKA · 03-08-2014, 07:17 PM

Hi Tom ,
Yes the 1/2 drive beam torque wrench is in foot pounds . Thanks for alerting me to this.
I will need to get an inch pound one.
Do you know the size of the socket that will fit the Mitchell drive shaft spline ?

03-08-2014, 07:17 PM	#3
MARKA Member Join Date: May 2010 Location: Melbourne Australia Posts: 39	Re: Mitchell overdrive spline !!! Hi Tom , Yes the 1/2 drive beam torque wrench is in foot pounds . Thanks for alerting me to this. I will need to get an inch pound one. Do you know the size of the socket that will fit the Mitchell drive shaft spline ?