The Ford Barn - View Single Post

19Fordy · 03-26-2019, 03:01 PM

Check and make sure the sender float is not filling with gas. Also, carefully remove the top of your sending unit and clean the contacts. May also have to adjust the little star wheel. If this is the 5th unit you have tried, your gauge may be bad. You have to have the patience of a toothache when working on these components.

03-26-2019, 03:01 PM	#16
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,950	Re: 1952 ford customline fuel sending unit Check and make sure the sender float is not filling with gas. Also, carefully remove the top of your sending unit and clean the contacts. May also have to adjust the little star wheel. If this is the 5th unit you have tried, your gauge may be bad. You have to have the patience of a toothache when working on these components.