Quote:
Originally Posted by tonydennisadw
this is the 5th fuel ,,,, sender ive put on none work correct i wired it same as original wire from gauge to center wire from frame to frame or screw to tanlk ive read these aftermarket gauges for 50 bucks are junk.....im temped to reverse the wires but i sure dont want any arc sparking or overheating in that area.... thanks dennis
|
Didn't notice you were using a repo resistance type sending unit. As already posted by others these really do not work will with an original gauge. Some claim they can get them to work, but at best, I think it only works at a given point to two. You will have to settle for that or locate an original sending unit.