The Ford Barn - View Single Post

37 Cab · 05-09-2019, 06:49 PM

Decided to go with a Mitchell. Talked to Steve today and they are about 12 weeks out. I like the idea it can be removed if wanted and he thinks I will not need to modify my floor even with a reversed spring. Since my rpm is close to 3000 at 60 I went with the 36% unit. I will post an update when I get it installed. (May be a while depending on my need for space)

05-09-2019, 06:49 PM	#19
37 Cab Senior Member Join Date: Dec 2014 Location: Miami Oklahoma Posts: 535	Re: Rear end gears Decided to go with a Mitchell. Talked to Steve today and they are about 12 weeks out. I like the idea it can be removed if wanted and he thinks I will not need to modify my floor even with a reversed spring. Since my rpm is close to 3000 at 60 I went with the 36% unit. I will post an update when I get it installed. (May be a while depending on my need for space) __________________ Tommy