The Ford Barn - View Single Post

Mikeinnj · 03-23-2020, 10:51 AM

Thank you all for your replies.
I visited a local Starter/Generator repair shop at Rayelco Generator Company Inc., 7 Ave B, Lodi, NJ 07644 and they removed the worn original insulated brushes and installed the new ones while I waited (about 10 monuted) They soldered the brushes with a devise similar to a tig welder in seconds with no damage to the cloth insulation at all. These guys were great and would not take any money. They have been in business for 70 years !

03-23-2020, 10:51 AM	#5
Mikeinnj Senior Member Join Date: May 2010 Location: Northern New Jersey Posts: 1,262	Re: 6 volt starter brish install help Thank you all for your replies. I visited a local Starter/Generator repair shop at Rayelco Generator Company Inc., 7 Ave B, Lodi, NJ 07644 and they removed the worn original insulated brushes and installed the new ones while I waited (about 10 monuted) They soldered the brushes with a devise similar to a tig welder in seconds with no damage to the cloth insulation at all. These guys were great and would not take any money. They have been in business for 70 years !