The Ford Barn - View Single Post

3twinridges · 12-28-2019, 10:23 PM

Thank you sir. This was my first build so I missed some of the details such as sealant in key places. I also did not seal the upper seal retainer in the block. I have read that since it’s not sealed it might rotate out with a punch. That way I can replace the seal, and seal the retainer in the block. Think the juice is worth the squeeze? It’s not leaking bad but only has about 2 miles on it!

JB

12-28-2019, 10:23 PM	#3
3twinridges Senior Member Join Date: Dec 2015 Posts: 548	Re: Front and rear seal replacement Thank you sir. This was my first build so I missed some of the details such as sealant in key places. I also did not seal the upper seal retainer in the block. I have read that since it’s not sealed it might rotate out with a punch. That way I can replace the seal, and seal the retainer in the block. Think the juice is worth the squeeze? It’s not leaking bad but only has about 2 miles on it! JB