The Ford Barn - View Single Post - Another Original 2-Blade Fan Takes Its Toll

JoeWay · 05-12-2010, 04:10 PM

Our club attended the Northern Ca Spring Opener in Ukiah recently. On the way home, one member lost a blade from his original fan. It wiped out a nearly new Brassworks radiator and put two dents in the upper right hood panel.

This fan had been wet-Magnafluxed at an aviation repair shop and certified free of cracks, yet failed within about 1400 miles of installation.

Guys and gals, take those original welded blades off unless you're about to enter judging. Which reminds me, IMO it is WAY past time for the standards to allow reproduction fan blades.

Joe

P.S. According to the adjuster, his Grundy insurance will cover all the damage except for the broken fan blade itself.

05-12-2010, 04:10 PM	#1
JoeWay Senior Member Join Date: May 2010 Location: Quincy CA Posts: 752	Another Original 2-Blade Fan Takes Its Toll Our club attended the Northern Ca Spring Opener in Ukiah recently. On the way home, one member lost a blade from his original fan. It wiped out a nearly new Brassworks radiator and put two dents in the upper right hood panel. This fan had been wet-Magnafluxed at an aviation repair shop and certified free of cracks, yet failed within about 1400 miles of installation. Guys and gals, take those original welded blades off unless you're about to enter judging. Which reminds me, IMO it is WAY past time for the standards to allow reproduction fan blades. Joe P.S. According to the adjuster, his Grundy insurance will cover all the damage except for the broken fan blade itself. __________________ 1929 Tudor since 1962 Feather River A's