Quote:
Originally Posted by Bob Bidonde
I caution you that the RH tail light brackets are not the opposite geometry of the original LH bracket, so do not transfer any location measurements from the LH side. Instead position the RH tail light with its bracket so it is visually of the same height and distance from the body as the LH light.
|
Good tip, Bob, thanks for this. I need to put a RH taillight on my Sedan. Engineer that I am, I would have done this analytically by transferring measurements. Looks like I get to enlist my bride as Visual QA on this one.
Any of you with original part numbers - are the RH taillight brackets the same across all the passenger car bodies (aftermarket suppliers seem to imply so)? Looking specifically for any cross-applications with 1930 Murray Town Sedan.
JayJay