Quote:
Originally Posted by FortyNiner
Disconnect the clutch equalizer shaft (the piece in the first pic) at the other end. There is a bracket with a bushing cup. Get your replacement bushing from vanpeltsales.com as the others are poor quality.
The Trans is held by a yoke easily accessed from the top. With the transmission cover removed from the floor, you'll see the connections. Unless you have the front clip off the truck, it may be easier to separate the transmission from the engine before removing.
|
FortyNiner, thanks for info on clutch equalizer shaft. Removed it today and bushing in the cup had completely worn through and was in 4 pieces. So glad I can replace this inexpensive part while I have removed! Appreciate all you guys and gals who take time to help!!!
Sent from my iPhone using Tapatalk