View Single Post
Old 11-11-2020, 07:10 PM   #4
WABOOM
Senior Member
 
WABOOM's Avatar
 
Join Date: Jun 2018
Location: Minnesota
Posts: 347
Default Re: Mechanical Oil pressure gauge fittings

I used 1/8 inch copper tube instead of the nylon tube that came with it. and the brass nut can be reused but the compression collar that goes on the 8th inch to cannot be refused you can always trim back the tube and put a new collar on it and reuse a new section that way

Last edited by WABOOM; 11-12-2020 at 06:41 AM.
WABOOM is offline   Reply With Quote