The Ford Barn - View Single Post

jimTN · 03-23-2021, 07:31 AM

There were some std pto applications but at some point there was a change and I believe it was in the gear cut. You have to be very careful in fitting up a PTO to the main gearbox and make sure there is a slight bit of play in the gears. That is done by varying the number of gaskets to attach it.

03-23-2021, 07:31 AM	#3
jimTN Senior Member Join Date: May 2010 Location: Powell, TN Posts: 2,509	Re: PTO knowledge There were some std pto applications but at some point there was a change and I believe it was in the gear cut. You have to be very careful in fitting up a PTO to the main gearbox and make sure there is a slight bit of play in the gears. That is done by varying the number of gaskets to attach it.