Re: 1935 Convertible Sedan top restoration story
I learned that the dowels on the top of the windshield were done two different ways. The dowel could be vertically up and down relative to the body or it could be angled in line with the windshield. If I were to buy the straight dowels, they would attach to the windshield and be at an angle, the angle of the windshield. If I were to buy the angled dowels, after mounting them to the windshield they would be vertical in relation to the body. Hopefully that makes sense to those interested.
My dowels appear to be the angled dowels because the dowel is vertical in relation to the body. This is important because I will need the correct brackets that fit into the wood header.
Last edited by rbassemir; 03-01-2020 at 12:35 PM.
Reason: replace http links to pictures with attachments instead
|