Thread: Zenith Rebuilding
View Single Post
Old 04-21-2021, 04:28 PM   #7
Rob Doe
Senior Member
 
Join Date: Apr 2021
Location: Central Illinois
Posts: 495
Default Re: Zenith Rebuilding
Quote:
Originally Posted by Rob Doe View Post
Guys, I have a fine point question regarding the reassembly of the Zenith. The secondary well in mine screws in until there are two or three threads showing above the brass well. I believe it is bottoming on the casting. Is this correct?



And the threads are sort of loose too. Is this correct also?
__________________
"It ain't what you know for certain that gets ya in trouble. It's what ya know for certain that just ain't so!"
Rob Doe is online now   Reply With Quote