The Ford Barn - View Single Post

Brentwood Bob · 04-21-2021, 03:39 PM

Several times I have had stuck secondary wells that put up a fight.
Not pretty when they stick.
I will try the heat and shock in water.
If the casting has a hairline crack there isn't any good time to find that out.
Thanks for the knowledge and experience.
I am up to 45-50 and some are damaged when I get them cleaned up and apart.
Matching tops and bottoms has been the time consuming operation. The Restorer series by Schmauch clarified that process.

04-21-2021, 03:39 PM	#5
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,247	Re: Zenith Rebuilding Several times I have had stuck secondary wells that put up a fight. Not pretty when they stick. I will try the heat and shock in water. If the casting has a hairline crack there isn't any good time to find that out. Thanks for the knowledge and experience. I am up to 45-50 and some are damaged when I get them cleaned up and apart. Matching tops and bottoms has been the time consuming operation. The Restorer series by Schmauch clarified that process. Last edited by Brentwood Bob; 04-22-2021 at 11:10 AM. Reason: Steve Schmauch's name corrected.