The Ford Barn - View Single Post - Need some advice on carburetor linkage...

scicala · 01-15-2021, 05:23 PM

Good Job Daniel. Also, with the Holley, if you put the linkage rod to the carb in the hole that is lower on the carb throttle lever, it will require less travel distance at the carb to get to WOT.

Sal

01-15-2021, 05:23 PM	#10
scicala Senior Member Join Date: Jun 2010 Location: Detroit suburb, MI Posts: 3,706	Re: Need some advice on carburetor linkage... Good Job Daniel. Also, with the Holley, if you put the linkage rod to the carb in the hole that is lower on the carb throttle lever, it will require less travel distance at the carb to get to WOT. Sal