The Ford Barn - View Single Post

johndee138 · 08-19-2021, 08:15 PM

It should be an easy fix when it is out of the car and I can put it on a stand and pivot it into a reasonable position. Give it a good flushing and see up in there. Right now it's in the car and runs well but exhaust header and assorted linkages complicate access. The hole site is vertical as well so gravity isn't in my favor. The second patch attempt is dripping pretty fast. I'll burn off the JB steel stick and try to get this Belzona magic goo to work. That's plan B. Plan C is a full on swap, which is what I had intended, just not this season.

08-19-2021, 08:15 PM	#11
johndee138 Senior Member Join Date: Jun 2010 Location: Atlanta GA Posts: 505	Re: got a hole in my water jacket It should be an easy fix when it is out of the car and I can put it on a stand and pivot it into a reasonable position. Give it a good flushing and see up in there. Right now it's in the car and runs well but exhaust header and assorted linkages complicate access. The hole site is vertical as well so gravity isn't in my favor. The second patch attempt is dripping pretty fast. I'll burn off the JB steel stick and try to get this Belzona magic goo to work. That's plan B. Plan C is a full on swap, which is what I had intended, just not this season.