Quote:
Originally Posted by Minnesota Mike
here are my picks. Original restoration started in 1972. I have owned for 5 years and just complete the project, but there is a vibration when the engine is running. I think it is the flywheel. because i put a crankshaft with the balancing weights.
|
With all the flywheels I do we checked a couple before they were cut and you would not believe how out of balance they were. We also do the cranks with flyweights and sometimes we have to weld weight to them to balance the crank because of balance problems.
If the vibration is at a standstill I would check the flywheel first or the crank second. If it vibrates when moving I would check the universal joint.