The Ford Barn - View Single Post

johndee138 · 06-20-2021, 08:06 PM

I put a 37 unit in mine. I had to redrill steering shaft location for the ignition lock to work. There is a tutorial I found online that I may still have the link to if you can't find it. Works WAY better than the stock unit. The hardest part was drilling out the rivets for the 36 steering mount. Drake has a replacement 37 and up bracket that you will have to use.

06-20-2021, 08:06 PM	#2
johndee138 Senior Member Join Date: Jun 2010 Location: Atlanta GA Posts: 505	Re: 1936 steering column upgrade I put a 37 unit in mine. I had to redrill steering shaft location for the ignition lock to work. There is a tutorial I found online that I may still have the link to if you can't find it. Works WAY better than the stock unit. The hardest part was drilling out the rivets for the 36 steering mount. Drake has a replacement 37 and up bracket that you will have to use. Last edited by johndee138; 06-20-2021 at 08:09 PM. Reason: additional info