The Ford Barn - View Single Post

hop up · 10-28-2020, 07:56 AM

Mike it would just be the rearbones that Deuce Lover mentioned as the 35 36 mounted on the axle and later would be mounted on the ends by the backing plates.

10-28-2020, 07:56 AM	#12
hop up Senior Member Join Date: Jun 2010 Posts: 413	Re: rear end identification Mike it would just be the rearbones that Deuce Lover mentioned as the 35 36 mounted on the axle and later would be mounted on the ends by the backing plates. __________________ Wanted flathead speed equipment Thanks