The Ford Barn - View Single Post

Jack Shaft · 05-24-2020, 03:07 PM

The B mains are pressurized already,dipper rods are good to 4k rpm before they move too fast to pick up oil. Jim Brierley for a cam he does regrinds,(rumor is he has Ed Winfields cam blanks)he has a nice head too,he also wrote a book on this. Bill Stipe if you want new..Dan McEachern for timing and crank gear,bronze is best. Todd Buttermore for heads as well,AER for your rods,Reds Headers for a tubing header,Snyders for cast.Schwalms in PA or Antique Engine Rebuilders (AER) in Skokie IL for machine work..outside of Ed Winfield the other gentlemen Ive named are members here and have way more knowledge, tons of other guys too John Neillson,Pete SC/CR..cats who know from experience and can guide to to what you need..

Mitchell Overdrive for the speeds your looking for

05-24-2020, 03:07 PM	#2
Jack Shaft BANNED Join Date: Dec 2019 Posts: 1,196	Re: Banger Engine Build The B mains are pressurized already,dipper rods are good to 4k rpm before they move too fast to pick up oil. Jim Brierley for a cam he does regrinds,(rumor is he has Ed Winfields cam blanks)he has a nice head too,he also wrote a book on this. Bill Stipe if you want new..Dan McEachern for timing and crank gear,bronze is best. Todd Buttermore for heads as well,AER for your rods,Reds Headers for a tubing header,Snyders for cast.Schwalms in PA or Antique Engine Rebuilders (AER) in Skokie IL for machine work..outside of Ed Winfield the other gentlemen Ive named are members here and have way more knowledge, tons of other guys too John Neillson,Pete SC/CR..cats who know from experience and can guide to to what you need.. Mitchell Overdrive for the speeds your looking for