View Single Post
Old 08-16-2020, 02:22 PM   #7
51woodie
Senior Member
 
51woodie's Avatar
 
Join Date: Apr 2018
Location: Chelmsford, ON Canada
Posts: 524
Default Re: hot ignition switch

I don't know if the '40 switch is the same as the '46, but I took mine apart, cleaned it, reinstalled, and it works like new. The way the switch is held together with flares in the tabs where the mounting bolt go through, meant that I had to solder the edge of the tabs together. Not a big deal.
Attached Images
File Type: jpg Ignition Switch (3).jpg (38.9 KB, 34 views)
File Type: jpg IMG_1605.jpg (35.4 KB, 37 views)
51woodie is offline   Reply With Quote