The Ford Barn - View Single Post

Terry,OH · 08-16-2020, 05:09 AM

Take it apart and clean the contacts. Do not use sandpaper to clean contacts. Also clean the brass threaded terminals on the back of the switch and look at each wire terminal carefully for damage of a loose connection to the wire. Reassemble make sure all is clean and snug.

08-16-2020, 05:09 AM	#5
Terry,OH Senior Member Join Date: May 2010 Posts: 4,743	Re: hot ignition switch Take it apart and clean the contacts. Do not use sandpaper to clean contacts. Also clean the brass threaded terminals on the back of the switch and look at each wire terminal carefully for damage of a loose connection to the wire. Reassemble make sure all is clean and snug.