The Ford Barn - View Single Post - 1/4 inch hole in shifting tower sloppy

Thread: 1/4 inch hole in shifting tower sloppy

View Single Post

Old

08-01-2020, 09:00 PM

#4

qmdv

Senior Member

Join Date: Dec 2012

Location: Payette, ID

Posts: 935

Default

Re: 1/4 inch hole in shifting tower sloppy

Quote:

Originally Posted by alanwoodieman

View Post

I have seen those holes and the slots drilled/ground to fit 5/16" drill bits, I would prefer you use the drill bit as they last a long time

5/16 seems extreme. I will use an F bit

qmdv is offline

Reply With Quote