Quote:
Originally Posted by rustynutz
Willowbilly, Can this alternator be converted to a v belt pulley?
|
Yup. On my rpu, I just found one off an older Ford 1G. I think I had to put a thin spacer behind this pulley so it didn't rub the case. I used a machined (not stamped) double pulley. It is also recommended that you use a 175 amp mega fuse in the charge wire.
Here's a pretty simple diagram. The basic small frame 3G is rated at 95 amps and can do most of that at idle. If you need more, the 130 amp is about the same size as the standard Delco.