Thread: Oil slinger, crank snout, crank sleeve.
View Single Post
Old 04-30-2020, 01:47 PM   #18
Rocket455
Member
 
Join Date: Oct 2018
Location: Corona, CA
Posts: 58
Default Re: Oil slinger, crank snout, crank sleeve.
Quote:
Originally Posted by JSeery View Post
Can you put a thin speedi sleeve over it?
I’m googling. I found an old thread here that shows a references a Napa part. Buts $50. Is leaning towards old sleeve and 2 piece seal.
Last edited by Rocket455; 04-30-2020 at 02:01 PM.
Rocket455 is offline   Reply With Quote