View Single Post
Old 08-24-2013, 07:56 PM   #65
Barber31
Senior Member
 
Barber31's Avatar
 
Join Date: Jul 2013
Location: San Antonio, Texas
Posts: 687
Default Re: Model A motor froze-up

My engine was stuck about 3 weeks ago also. What I did to settle my curiosity was remove the oil pan and dry every piston and rod really good. So when I poured the mixture in each cylinder I could clearly see from the bottom of the engine which cylinder was allowing the fluid to leak past the rings. The dry piston and rod is the culprit. The one stuck. Eventually I still pulled the head off to which I was glad I did due to the number 1 cylinder being severely gouged from a broken locking pin and moving piston pin.
Barber31 is offline   Reply With Quote