The Ford Barn - View Single Post

sturgis 39 · 09-28-2012, 04:36 PM

The voltage of the battery regulates the voltage. Have you polarized the generator? The old type cut, you just run a jumper wire between the two terminals on the cutout for a second or less. The new electronic cutouts do not require polarization. If you are using an electronic cutout make sure it is positive ground or however you have the battery connected.

Did you load test the battery?

09-28-2012, 04:36 PM	#112
sturgis 39 Senior Member Join Date: Aug 2010 Location: Lead. South Dakota Posts: 963	Re: Is There An Electrician In The House? The voltage of the battery regulates the voltage. Have you polarized the generator? The old type cut, you just run a jumper wire between the two terminals on the cutout for a second or less. The new electronic cutouts do not require polarization. If you are using an electronic cutout make sure it is positive ground or however you have the battery connected. Did you load test the battery? __________________ IF IT CAN NOT BE FIXED WITH BLASTING WIRE, JB WELD OR DUCT TAPE ---IT CAN NOT BE FIXED Do not get me started on the stupidity of ethanol. I think one of the monitors is from Iowa and he will delete the thread. Last edited by sturgis 39; 09-28-2012 at 04:43 PM.