The Ford Barn - View Single Post

Logan · 06-20-2010, 02:01 PM

Your gonna have to make an adapter plate, cut part of the cross member, shorten the drive shaft, cut new hole in floorboard for shifter, and im sure im forgetting one or two other little things. But its well worth all the work. With a good engine there is no reason why you couldnt run at 60-65 mph.

06-20-2010, 02:01 PM	#2
Logan Senior Member Join Date: May 2010 Location: Fort Worth, Texas Posts: 1,055	Re: F150 tranny with overdrive Your gonna have to make an adapter plate, cut part of the cross member, shorten the drive shaft, cut new hole in floorboard for shifter, and im sure im forgetting one or two other little things. But its well worth all the work. With a good engine there is no reason why you couldnt run at 60-65 mph. __________________ Cowtown A's