Sponsored Links (Register now to hide all advertisements)
wheel well patch sittin in place
some primer on the subframe and some weld-through primer on the lower part of the patch because i dont know if the patch gets spot welded to the subframe once ya wrap it around or not.
tacked in .
i usually dont work with that many tacks but for this one it seemed impossible not to. there were alot of variations in where the patch panel wanted to sit and where the og wheel well was so a ton of tacks it was
finished up!
for future reference it took a little more then 18 feet of tig rod to weld in the patch haha
another view