The Ford Barn - View Single Post

Ron Lachniet · 01-09-2016, 08:07 AM

When they talk about cutting the cross member when you use the model a bell housing it sounds like a big deal. When I put mine in I had to grind an area about 1/4x1/2 in. and it is at the top of the cross member where you would never see it unless you removed the transmission and knew where to look. The F150 transmission makes driving in todays traffic a pleasure.

01-09-2016, 08:07 AM	#240
Ron Lachniet Senior Member Join Date: Dec 2010 Location: Lowell MI Posts: 167	Re: F150 tranny with overdrive When they talk about cutting the cross member when you use the model a bell housing it sounds like a big deal. When I put mine in I had to grind an area about 1/4x1/2 in. and it is at the top of the cross member where you would never see it unless you removed the transmission and knew where to look. The F150 transmission makes driving in todays traffic a pleasure.