View Single Post
Old 03-10-2015, 07:01 PM   #13
goodoldvic
Senior Member
 
goodoldvic's Avatar
 
Join Date: Sep 2012
Location: New Jersey shore
Posts: 257
Default Re: Engine Rebuild: Leveling/Boring/Seats/Crank

I don't see any torque plates on the engine block while it is being honed. I'm honing mine in my garage, by hand, and no plates. I thought a reputable rebuilder as J&M would use torque plates. Just an observation on my part.
goodoldvic is offline   Reply With Quote