The Ford Barn - View Single Post

haag1332 · 02-08-2015, 02:00 AM

Hoarsewhisperer,

In response to your post. You are correct, but unfortunately the .433 is exactly 11mm and 11mm sockets are manufactured at .441 across the flats. Far cry from .40625 in the machinist world.

02-08-2015, 02:00 AM	#35
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Hoarsewhisperer, In response to your post. You are correct, but unfortunately the .433 is exactly 11mm and 11mm sockets are manufactured at .441 across the flats. Far cry from .40625 in the machinist world.