The Ford Barn - View Single Post - How many attachment points in a 1940 Ford Tudor

Canuk40 · 08-02-2017, 05:10 PM

Work progresses on the rust repair. Have fit the new floor and am working on attachments points to frame.
Bought a bolt kit from Drake's (bolts, nuts, washers).
In the kit are 3 lengths of hex head bolts, which should be easy to place.
Also included are 14 bolts (I think they are called Class Bolts). Round heads and squared at top of shank below bolt head. Typically they need a square hole to lock them in place so a nut can be tightened.
No idea where they are used. I sent a message to Drake's but received no reply, so am hoping someone here has an idea where they are used.

08-02-2017, 05:10 PM	#7
Canuk40 Junior Member Join Date: Feb 2015 Location: Rosseau. Ontario Posts: 16	Re: How many attachment points in a 1940 Ford Tudor Work progresses on the rust repair. Have fit the new floor and am working on attachments points to frame. Bought a bolt kit from Drake's (bolts, nuts, washers). In the kit are 3 lengths of hex head bolts, which should be easy to place. Also included are 14 bolts (I think they are called Class Bolts). Round heads and squared at top of shank below bolt head. Typically they need a square hole to lock them in place so a nut can be tightened. No idea where they are used. I sent a message to Drake's but received no reply, so am hoping someone here has an idea where they are used.