The Ford Barn - View Single Post

JM 35 Sedan · 12-07-2013, 01:32 AM

That was a pretty slick tool and method for removing and installing the roller bearing sleeve shown in Kurt's video.
Since I didn't have a tool to do that on my rear rebuilds, I made a stepped diameter pusher plug that mounts on the end of a long piece of all thread rod and came in through the back end of the torque tube and drove the lip seal and the bearing sleeve out the front of the TT at the same time.

12-07-2013, 01:32 AM	#3
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: 1933 Drive Shaft Roller Bearing Removal That was a pretty slick tool and method for removing and installing the roller bearing sleeve shown in Kurt's video. Since I didn't have a tool to do that on my rear rebuilds, I made a stepped diameter pusher plug that mounts on the end of a long piece of all thread rod and came in through the back end of the torque tube and drove the lip seal and the bearing sleeve out the front of the TT at the same time. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*