View Single Post
Old 11-26-2020, 09:51 PM   #19
mleder
Senior Member
 
Join Date: May 2010
Posts: 177
Default Re: My Distributor Cam Screw is Stuck

If you have access to a welder, buy a 1/8" npt female to 1/4"npt male black steel pipe bushing fitting. Place the 1/4" side on top of the screw and thru the 1/8" weld a little bit. Let it cool then you can take a 5/8" wrench and have a good grip to turn it loose. The heat will do wonders to loosen things up.
mleder is offline   Reply With Quote