The Ford Barn - View Single Post - Water jacket

svm99 · 03-23-2013, 09:03 PM

It looks pretty clean to me, how have you cleaned it? I use a 3' section of MIG liner conduit which is much like choke conduit and run it through every area of the water jacket I can get it with a good flood of water running also. I believe the block blast previously mentioned does a great job on all outer/exposed surfaces but does not clean the internal cooling passages much other than what bakes off in the cooking process.

Good Luck, Paul J.

03-23-2013, 09:03 PM	#3
svm99 Senior Member Join Date: May 2010 Location: Garlic Country of CA Posts: 537	Re: Water jacket - How clean is clean enough? It looks pretty clean to me, how have you cleaned it? I use a 3' section of MIG liner conduit which is much like choke conduit and run it through every area of the water jacket I can get it with a good flood of water running also. I believe the block blast previously mentioned does a great job on all outer/exposed surfaces but does not clean the internal cooling passages much other than what bakes off in the cooking process. Good Luck, Paul J.