View Single Post
Old 01-14-2020, 06:46 AM   #11
PeteVS
Senior Member
 
PeteVS's Avatar
 
Join Date: May 2010
Location: FP, NJ
Posts: 2,769
Default Re: Simple DIY distributor/ignition bench tester

I'm into old C**** distributors like Bubba does up. I was working on one and wanted to set the dwell. So I turned the distributor with a 1/2" drill, hooked it up to a battery and coil and then used a dwell meter to set the points.
__________________
Don't never get rid of nuthin!
PeteVS is offline   Reply With Quote