[barrelnose]

I have a Mallory YS701AVC in a Model A and need to get the distributor sorted.
The guys who are setting it up have asked for the setup details so they can set the curve up on their machine.
Can anybody please tell me what the initial starting degrees and final are and at what rev range they would be set at?
Standard motor,standard flywheel and only mod is a 94 Carb.
Probably not real critical but I just need an answer for the sparkys setting it up.
At the present I set the crank timing at 10 degrees at Idle but it won't advance once the revs are increased,possibly the springs are for a higher revving engine?

Thanks in advance(no pun intended)
I have also asked on the Hamb by the way,
I have read many posts on the subject but nothing really I can