The Ford Barn - View Single Post

1962ThunderbirdRocket · 07-12-2021, 07:33 PM

This is what we did. Metal bars with two adjustments. 2.5" and 5" drilled for moving closer or farther if we want.

Attached seat to the bars and then to the body by different length grade 8 bolts from underneath the car.

The two factory studs were removed. The metal bars were threaded to accept the Grade 8 bolts.

The added legroom is wonderful.

07-12-2021, 07:33 PM	#10
1962ThunderbirdRocket Junior Member Join Date: Jun 2021 Location: Yakima, Washington Posts: 8	Re: 62 TBird Driver’s Seat move back farther This is what we did. Metal bars with two adjustments. 2.5" and 5" drilled for moving closer or farther if we want. Attached seat to the bars and then to the body by different length grade 8 bolts from underneath the car. The two factory studs were removed. The metal bars were threaded to accept the Grade 8 bolts. The added legroom is wonderful. Last edited by 1962ThunderbirdRocket; 07-12-2021 at 10:14 PM. Reason: Typo