The Ford Barn - View Single Post

rickd · 01-09-2021, 09:44 AM

I just did my king pins using the Snyders reamer on my first Model A. Long time Model T guy (30 years) enjoying my new 28 Roadster. I followed the Les Andrews book. I pressed in both new bushings first, then did the reaming. The reamer has a smaller front end that does a preliminary reaming and keeps the reamer in line with both bushings as the second wider part of the reamer passes through the bushing. Flip the spindle over and do it again. Nice results, king pin fits nicely without play.

01-09-2021, 09:44 AM	#20
rickd Junior Member Join Date: Sep 2018 Location: Grand Forks, ND Posts: 9	Re: King pin replace I just did my king pins using the Snyders reamer on my first Model A. Long time Model T guy (30 years) enjoying my new 28 Roadster. I followed the Les Andrews book. I pressed in both new bushings first, then did the reaming. The reamer has a smaller front end that does a preliminary reaming and keeps the reamer in line with both bushings as the second wider part of the reamer passes through the bushing. Flip the spindle over and do it again. Nice results, king pin fits nicely without play.