The Ford Barn - View Single Post

flatjack9 · 11-28-2020, 03:12 PM

The 8CM or EAB are the best stock cams you can use. I've had a Winfield SU1-A in my 39 for 25 years now and really like it. Still a good bit of low end torque. I can start out in second gear if I want too. Have a 3.70 Bronco rear axle. The L-100 is very similar. There are others that have been recommended, but I only have experience with these two. Tilden lists an "improved" 8CM, I've always meant to see if they actually will grind one.

11-28-2020, 03:12 PM	#5
flatjack9 Senior Member Join Date: May 2010 Location: Oshkosh, Wi Posts: 4,527	Re: Best stock 8BA camshaft The 8CM or EAB are the best stock cams you can use. I've had a Winfield SU1-A in my 39 for 25 years now and really like it. Still a good bit of low end torque. I can start out in second gear if I want too. Have a 3.70 Bronco rear axle. The L-100 is very similar. There are others that have been recommended, but I only have experience with these two. Tilden lists an "improved" 8CM, I've always meant to see if they actually will grind one.