The Ford Barn - View Single Post

Binx · 01-23-2014, 09:29 PM

The stock unground base circle is 1.165" so if you find your Max 1 to be the same or close you should be okay. Each regrind of the same profile takes another .050" or so off and will sink your lifters deeper.

Lonnie

01-23-2014, 09:29 PM	#22
Binx Senior Member Join Date: Oct 2011 Location: Gloucester VA Posts: 1,042	Re: some advice for adjusting valves The stock unground base circle is 1.165" so if you find your Max 1 to be the same or close you should be okay. Each regrind of the same profile takes another .050" or so off and will sink your lifters deeper. Lonnie Last edited by Binx; 01-23-2014 at 09:36 PM.