The Ford Barn - View Single Post

19Fordy · 04-25-2021, 01:39 PM

Doesn't look like you have installed ss bolts as your photo shows studs.

You will probably have to remove the stud and reseal it.

I would be hesitant to use stainless bolts as they may not be able to withstand the torque required.

Here's a good thread.
https://www.fordbarn.com/forum/showt...ad+bolt+torque

04-25-2021, 01:39 PM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,950	Re: Head Bolt continually weeping Doesn't look like you have installed ss bolts as your photo shows studs. You will probably have to remove the stud and reseal it. I would be hesitant to use stainless bolts as they may not be able to withstand the torque required. Here's a good thread. https://www.fordbarn.com/forum/showt...ad+bolt+torque Last edited by 19Fordy; 04-25-2021 at 01:45 PM.