The Ford Barn - View Single Post - 2-Tooth Steering Box Lower Race

Mitch//pa · 12-04-2016, 05:38 PM

I usually give it a shot with my mig welder, then tap it out with a small roll pin punch through the lower bolt holes catching the edge..its basically loose after the mig hit

12-04-2016, 05:38 PM	#3
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: 2-Tooth Steering Box Lower Race I usually give it a shot with my mig welder, then tap it out with a small roll pin punch through the lower bolt holes catching the edge..its basically loose after the mig hit Last edited by Mitch//pa; 12-04-2016 at 07:39 PM.