The Ford Barn - View Single Post

jimvette59 · 10-02-2021, 07:22 AM

I have used shim stock on some projects in the past. It can be purchased from Mc Master Carr or MSC on line. If they are out of round they should be reamed with a spiral reamer to the nearest size and a bushing should be purchased with the proper I D & O D. JMHO Jim T.
" If it was easy somebody else will be doing it "

10-02-2021, 07:22 AM	#4
jimvette59 Senior Member Join Date: Jun 2010 Location: Perry OH Posts: 1,330	Re: Rear spring and shackle bushing I have used shim stock on some projects in the past. It can be purchased from Mc Master Carr or MSC on line. If they are out of round they should be reamed with a spiral reamer to the nearest size and a bushing should be purchased with the proper I D & O D. JMHO Jim T. " If it was easy somebody else will be doing it " Last edited by jimvette59; 10-02-2021 at 07:30 AM.