Re: Smokin
Bend the tabs on the switch so that they cannot contact the metal behind them. Insulate the contacts with several layers of electrical tape.
When done with the above, disconnect the battery and use an ohm meter to test the wiring, looking for shorts. Do not test the wiring by trying to run the car.
Ask someone with electrical experience to help.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|