The Ford Barn - View Single Post - 12v conversion 59a starter solenoid 4 pole. 46 Mercury.

koates · 09-17-2020, 01:49 AM

Phil, that sounds as if it is connected OK and should work providing that the firewall solenoid is switching ON when the dash button grounds one of the small solenoid terminals. Time to use a test light (not your meter) and test to see where you are getting power through and where you are not getting power through. Does the firewall solenoid CLICK when you press the starter button ? Regards, Kevin.

09-17-2020, 01:49 AM	#15
koates Senior Member Join Date: May 2010 Location: Melbourne Australia. Posts: 2,078	Re: 12v conversion 59a starter solenoid 4 pole. 46 Mercury. Phil, that sounds as if it is connected OK and should work providing that the firewall solenoid is switching ON when the dash button grounds one of the small solenoid terminals. Time to use a test light (not your meter) and test to see where you are getting power through and where you are not getting power through. Does the firewall solenoid CLICK when you press the starter button ? Regards, Kevin.